APC Smart UPS Online Range (1000VA-20kVA)

Product Description

The Smart-UPS On-Line UPS range from Specialist Power Systems provide high density, true double-conversion on-line power protection for servers, voice / data networks, medical labs, and light industrial applications.

Capable of supporting loads from 1 to 20kVA in a rack/tower convertible form, the Smart-UPS On-Line is available from 2U to 12U. Recent family extensions at 15 and 20kVA enable support of power-hungry blade servers or heavily loaded equipment racks. 

When business-critical systems require runtime in hours, not minutes, Smart-UPS On-Line can be configured with matching battery packs to comply with aggressive runtime demands. The included PowerChute management software provides unattended graceful shutdown of network operating systems. All models 5kVA and above include an integrated Network Management Card for remote management (optional on models below 5 kVA). 

The Smart-UPS On-Line family provides customers with a reliable source of uninterruptible power even in demanding power environments, including very wide input voltage window, extremely tight output voltage regulation, frequency regulation, internal bypass, and input power factor correction.


  • Scalable runtime allows additional run time to be quickly added as needed.
  • Hot-swappable batteries ensure clean, uninterrupted power to protected equipment while batteries are being replaced
  • Intelligent battery management maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Automatic internal bypass supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging prolongs battery life by regulating the charge voltage according to battery temperature.
  • Automatic restart of loads after UPS shutdown automatically starts up the connected equipment upon the return of utility power.


  • Plug-and-Play external batteries ensure clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Rack/Tower convertible protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Flash upgradeable firmware allows the user to install maintenance releases of firmware remotely using FTP.


  • Disconnected battery notification warns when a battery is not available to provide backup power.
  • Predictive failure notification provides early-warning fault analysis ensuring proactive component replacement.
  • Audible alarms provides notification of changing utility power and UPS power conditions
  • User-replaceable batteries increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Periodic battery self-test ensures early detection of a battery that needs to be replaced.


  • Resettable circuit breaker allows easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Safety-agency approved ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Cold-start capable provides temporary battery power when the utility power is out.
  • Frequency and voltage regulation give higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Generator compatible ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Input Power Factor Correction minimizes installation costs by enabling the use of smaller generators and cabling.
  • Power conditioning protects connected loads from surges, spikes, lightning, and other power disturbances.


  • Serial connectivity provides management of the UPS via a serial port.
  • SmartSlot allows the user to customize UPS capabilities with management cards.
  • LED status indicators quickly understand unit and power status with visual indicators.
  • Network manageable provides remote power management of the UPS over the network.
  • InfraStruXure Manager Compatible enables centralized management via the APC InfraStruXure Manager.                             

Specialist Power Systems are an approved sales partner to APC in the UK with expert technical knowledge. Call us on 01234 851155 to discuss your requirements and how we can help you find the right product and support.

Up to 5 years
Discover Product Range

Products in this Range